844-488-4880

Mon-Fri 9AM-5PM (Alaska)

D605 Thermistor Data Logger

Product Highlights
  • Monitors up to 4 plug and play Digital Temperature Cable (DTC) ports which connect up to 125 sensors
  • Run for years with the ultra low-power processor
  • Charge and recharge with the built in solar panel
  • 32 MB of data storage expandable to 1 GB
  • Transmit data from anywhere using direct-to-orbit connectivity
  • Bluetooth 5.0 wireless interface
  • Resist the elements with our IP67 factory seals

Overview

Log your data without logging the miles. The beadedstream D605 Thermistor Data Logger is built for remote deployments and reliable performance in extreme conditions. It can connect up to 4 digital temperature cables and can monitor up to 125 sensors. This temperature data logger has an enhanced solar power battery so you can collect long-term data. In addition, the datalogger is designed with Iridium satellite link and Bluetooth for your connectivity of choice.

 

The D605 data logger architecture allows for full flexibility to expand sensor interfaces and additional peripherals such as extra memory and data transmitting options (future developments).

Features

4 plug and play Digital Temperature Cable (DTC) ports connect up to 125 sensors

Capacity for over 10 million samples

Pre-installed Iridium embedded two-way satellite data transceiver with integrated Iridium antenna can transmit data from any location worldwide.

3.5 watt solar panel with temperature compensated charge control circuit to protect and prolong battery life.

Don’t worry about moisture ingress - we’ve removed the screws and fully sealed the logger unit to provide additional protection from the weather.

Specification

Communications

● Bluetooth 5.0 wireless interface

● Compatible with Capture, beadedstream’s iOS app

Worldwide Telemetry

● Embedded two-way satellite transceiver and Iridium antenna

● 100% pole-to-pole worldwide coverage. integrated 1575.42 MHz GPS antenna

Ports

● 4 plug and play Digital Temperature Cable (DTC) ports, can monitor up to 125 sensors

● One additional custom-ordered port for the Sonic Range Sensor

Battery / Power

● No plug-in required.

● Rechargeable 6V 5.5Ah sealed lead-acid battery

● 6+ months without solar recharge (transmitting daily), survives northern winters

Integrated Solar

● 3 W integrated single-crystal silicon solar cell; works even in partial shading

● Full battery recharge with 5 days of sunlight

Data Storage

● Capacity for over 10 million samples

● 20+ years on-board data integrity

● 32 MB non-volatile flash data storage expandable to 1 GB

Software / Hardware

● Over the Air (OTA) software updates

● Built in self-diagnostics and logger health monitoring

● Open architecture for integrating most sensors and IoT technologies

● Built-in magnetic switch is immune to dust, dirt, mud and water.

● Used for advanced settings only for the D605

Operating Range

● -40° C to +60° C (-40° F to +140° F)

● Fully NEMA Type 4X/IP68

Mounting

● Easy to mount with built-in features for pivot arm, hose clamps, and/or Unistrut

Weight and Dimension

● 2.3 kg (5.1 lbs) (without mount)

● 15.5 cm x 15.5 cm x 9.0 cm (6.1” x 6.1”x 3.5”)

Videos

 

 

FAQs

For D405, D505, D605, and Buoy loggers:

  • Lead acid (rechargeable)
  • Safe for flying

 

For Spot logger

  • Lithium (This battery is not rechargeable. Do not try to recharge.)
  • Restricted for transportation (Dangerous Goods, Class 9 worldwide)
  • Uses a 3.6V 19Ah Tadiran TL-5930 Lithium Battery, available for purchase on Amazon.com, Amazon.ca (for Canada), and other local and online battery retailers. Customers are responsible for sourcing the battery.